Liquivision kaon, Руководство пользователя

Страница: 77 / 107

Dive Computer
User Manual
Liquivision Products, Inc -
77
- Revision 1.9 Software 1.17
One of large numbers on your display is the dive time – its location depends on the display setting you
have chosen. Please refer to the screenshots above to locate the time value for each display setting.
Dive Time
Dive time is measured in seconds, starting from the moment your KAON reaches 1.6 meters / 5.25 feet.
It will stop once you surface, and it will reset once you have been on the surface for more than 5
minutes. Dive time can be displayed in several ways:
The minutes of your dive can be displayed as follows (refer to the “ Show Hours ” section for details):
-
minutes:seconds, e.g. 135:00
-
hours:minutes:seconds, e.g. 2:15:00
The seconds of your dive can be displayed as follows (refer to the Analog Clock ” section for details):
-
as a number, e.g. 135:00
-
a graphical indication of the seconds elapsed: a bar display filling up to a full minute
Another one of the large number on the display is your current depth – its location depends on the
display setting you have chosen. Please refer to the screenshots above to locate the depth value for each
display setting.
Depth
If you chose metric units, you will see depth in meters, and one decimal place in smaller font.
If you chose imperial units, you will see depth in feet, and no decimal places.
Please refer to the “
Units ” section of the manual for details.
As you begin your dive and your KAON goes into dive mode, the stopwatch will be off. You can
activate the stopwatch during your dive by tapping into menu mode and selecting “Stopwatch On”.
Turning the stopwatch on will cause the time display to shrink and move, and the stopwatch will take
its place.
Stopwatch
Stopwatch: OFF Stopwatch: ON
STANDARD