Dive Computer
User Manual
Liquivision Products, Inc
-
95
-
Revision 1.9 Software 1.17
DO NOT USE PLIERS
-
DO NOT use pliers or any tool to remove
the O-ring, because you can scratch the casing
plastic and damage it. This can prevent a good O-
ring seal in the future.
14. Inspect the new O-ring for dust or defects
-
DO NOT use a dusty O-ring!
- If the new O-ring is not clean, wash it with
clear water and let it air-dry
15. Lubricate the new O-ring
- Use silicone O-ring lubricant
- Apply a tiny amount to a dry O-ring (it will not
absorb properly if the O-ring is wet)
- Roll the O-ring between your fingers to spread
the lubricant
- Remove any excess lubricant with your fingers
16. Ease O-ring onto battery cap
- Starting at one side, gently ease O-ring over the
battery cap
