Dive Computer
User Manual
Liquivision Products, Inc
-
39
-
Revision 1.9 Software 1.17
The “Blank” mode was created on the request of cave-diving instructors, who found that the KAON’s
screen shone so brightly that it would illuminate the cave during a lights-out drill. The “Blank” mode
allows students to turn off the screen on their KAON, without interrupting the unit’s functioning.
The “Stealth” mode, which features all data in a dim red color, is designed for use at night as red has
the least impact on the quality of your night vision.
The “Dim” mode, which features all data in a dim green color, can also be used at night to preserve
your night vision, or as an ultra-battery-savings measure in low-light conditions.
This setting affects how the seconds portion of your dive time is displayed. By selecting “Off”, you
will have the seconds value printed as a number on your display. By selecting “On”, you will see a
graphical indication of the seconds elapsed: a bar display filling up over time to a full minute.
6.8. Analog Clock
Analog Clock: OFF
Analog Clock: ON
This setting affects how your total dive time will be displayed. By selecting “Off”, you will have the
dive time shown as minutes:seconds, with the minutes value exceeding 60 once more than an hour has
elapsed. By selecting “On”, you will have the dive time show as hours:minutes:seconds, with the
minutes value only reaching 59 before being converted into 1 hour and 0 minutes.
6.9. Show Hours
Show Hours: OFF
Show Hours: ON
