background image

2

C

ongratulations on your purchase of the
Lionel Union Pacific “Veranda”

Turbine! This durable, die-cast metal
locomotive features two Pittman

®

motors

and is equipped with TrainMaster Command
Control, the RailSounds sound system, and

the Odyssey System for speed control. The
auxiliary tender is also equipped with
TrainMaster Command Control for
operation of its two ElectroCouplers and
back-up light. 

Congratulations! 

The following Lionel marks may be used throughout this instruction manual and are protected under law. All rights
reserved.

Lionel

®

, TrainMaster

®

, Odyssey

®

, RailSounds

, CrewTalk

, TowerCom

, DynaChuff

, StationSounds

,

Pullmor

®

, ElectroCoupler

, Magne-Traction

®

, CAB-1 Remote Controller

®

, Powermaster

®

, Lionel ZW

®

, ZW

®

Features of the auxiliary tender

ElectroCouplers at the front and rear of
the tender

Illuminated back-up light

Features of the Veranda locomotive

TrainMaster Command Control equipped

RailSounds sound system with
TowerCom announcements and
CrewTalk communication (in Command)

Odyssey System for speed control

Dual high-torque Pittman

®

motors

ElectroCouplers at the front and rear of
the locomotive

Operating headlight, hazard light,
directional lighting, and illuminated
marker lights

Lighted interior

Dual fan-driven smoke units

Содержание 71-8149-250 Veranda

























Отзывы: