T
o select a single operational state for
your Lionel Veranda (example: forward
only), you can deactivate the Command
reverse unit’s sequencing function with the
Command reverse unit switch.
Get your locomotive moving in your
desired direction, then
slow it down
without stopping.
Set the Command reverse
unit switch to PROG. Refer to Figure 1 for
the location of the switch. The Veranda is
now “locked” into your chosen direction.
When you no longer want single-direction
operation, just slide the Command reverse
unit switch back to RUN.
Your locomotive’s reverse unit will
“reset” to forward after any five
second or longer power
interruption, regardless of the
original locked-out direction.
Locking your Veranda into a single operational state
Transformer operations
Figure 1. Switch locations on the locomotive
5
Note!
Volume control knob
Command
reverse
unit switch
RUN
PROG
Odyssey
switch
ON
OFF
Rear
smoke
unit
switch
ON
OFF
Front
smoke
unit
switch
ON
OFF
RailSounds
switch
FRONT
REAR
SND
NO SND
