4
3
3
Move ‘em out!
•
Get your Veranda moving.
Press the DIRECTION button on your CAB-1
remote or Lionel transformer. This sequences the Command reverse unit to the
next operating state.
•
When your locomotive begins to move,
the Mars light will illuminate and
the red hazard light will turn off on the front of your locomotive. The Mars light
is on only when the locomotive is in motion. The hazard light is on only when
the locomotive is in neutral.
•
Adjust track voltage
until the Veranda moves at your desired speed. To
increase speed, increase track voltage. To decrease speed, reduce voltage. To stop
the locomotive, turn off track power.
•
See page 5 for information on locking your Veranda in a single
operational state.
Place your Veranda locomotive on Lionel or Lionel-
compatible O gauge track with a diameter of 72” or larger.
2
2
Power up your Veranda with your transformer.
•
The red hazard light will illuminate at the front of your
locomotive.
The locomotive is in neutral.
•
Your Veranda is designed to operate on 8-18 volts alternating
current.
Virtually all Lionel and Lionel-compatible alternating-current
transformers are suitable.
Do not power your Veranda with direct current
(DC). Damage to
sensitive electronic components may occur.
When you first power up your track, the Veranda will wait between
three and eight seconds
as it “listens” for digital language from the
TrainMaster Command Base (available separately). When it’s determined that it’s
on a conventional (non-Command) railroad, the Veranda’s headlight will
illuminate and RailSounds will fire up. At this point, the Veranda is in neutral.
(This occurs when placing the Veranda on your railroad for the first time.
Thereafter, it will start in forward following every three-second power interruption.)
1
1
Running your Veranda with a Lionel transformer
Transformer operations
Caution!
Note!
•
If you are operating your locomotive with the auxiliary tender,
place the tender on the track behind the locomotive with the back-up light at the
rear.
