10
Note!
Note!
Note!
Note!
Your Veranda’s RailSounds system—the basics
L
ionel RailSounds is the most realistic
model railroad sound system in the
world. Your Veranda features diesels sounds
at low speeds and turbine sounds as the
speed increases.
As illustrated in Figure 3, you may choose
to install a 9-volt
alkaline
battery in your
Veranda. This ensures interruption-free
operation of RailSounds. Remove the six
body screws illustrated in Figure 5 on
page 19. The battery clip is located inside
the body toward the rear of the locomotive.
Attach the battery harness, slide the battery
into the holder, and replace the body.
When you first apply track power, the
Veranda’s RailSounds system produces
sounds of the locomotive at rest. As the
Veranda moves, the RPM’s increase with the
locomotive’s speed.
To silence the sounds (the horn and bell
remain unaffected), slide the RailSounds
switch on the underside of the locomotive to
NO SND (refer to Figure 1 on page 5)
before
powering up the locomotive
.
Please remove the protective cover from the battery clip.
Although RailSounds is powered by track voltage, the
battery is required
for
uninterrupted operation and shutdown sequences. Use only alkaline batteries.
Discontinue locomotive power
for 10 seconds
before changing the RailSounds
SND/NO SND switch position.
If RailSounds “drops out” during track power interruptions (for example,
during a direction change), replace the battery.
RailSounds operations
Figure 3. Battery installation
