2224 Layer 2 Management 24-Port 10/100 Ethernet Switch
nnect II 2224
Configuring the Switch
The Switch features a menu-driven console interface for switch configura-
tion. The Switch can be configured locally through the console port using a
terminal emulation software, such as Hyperterminal, or remotely via a Telnet
connection.
This User Guide provides instructions on how to configure and manage the
Switch using the console interface. If you wish to manage the switch through
a web connection, you can do so by connecting to the Switch’s IP Address
using your web browser.
Although the web-based management menu will differ in appearance from
the console-based management menu, you will still have access to all the
same configuration and management features.
When logging on to the Switch, you will receive the following screen prompt:
Linksys Switch
Screen Name:
System Name: PC22224
Console Login:admin
Password:
Enter the default login and password, pressing Enter after each entry (as
shown in the image below).
11
ProConnect II
®
Series
Remote Console Management
You can manage the Switch remotely by having a remote host establish a
Telnet connection to the switch via an Ethernet or modem link.
To use this management method:
•
The host must run a SLIP protocol if a modem is used
•
The Switch must have an IP address
•
Remote Telnet Login must be enabled on the Switch.
The Remote Console Management interface is identical in appearance and
functionality to the Local Console Management interface. If you are using
Microsoft’s Telnet, the terminal setting should be set to
VT100/ANSI
.
SNMP Management
You can manage the Switch across a LAN using an SNMP Network
Management Station with a graphical user interface. This management
method allows you to monitor statistical counters and set switch parameters
from the remote Network Management Station.
To use this management method:
•
The network must use the IP protocol
•
The Switch must be configured on the network with a proper IP address
•
SNMP must be enabled on the Switch.
Assigning an IP Address to the Switch
To manage the Switch remotely through the console port or with an SNMP
Management Station, you must assign an IP address to the Switch. To assign
an IP address to the Switch, refer to the Configuring the Switch section.
Logging On to the Switch
When you log on to the Switch for the first time, a sign-in string appears and
you are prompted for a console login name and password. The factory default
login name is set as “admin” and the password is blank. You can create a
password after you log on.
10
Overview
Web-Based Configuration and Management
Logging On to the Switch
