2224 Layer 2 Management 24-Port 10/100 Ethernet Switch
nnect II 2224
79
ProConnect II
®
Series
3. Highlight the range of ports you want to associate with the trunk group,
then press Enter. The port range appears next to the selected trunk group,
as in the following screen.
4. For each trunk port you want to select, highlight it and press Enter. An
asterisk will appear next to the selected port as in the following screen (if
you change your mind, highlight the port and press Enter again to dese-
lect it and remove the asterisk.)
5. When you finish selecting ports, press Esc. A screen similar to the fol-
lowing (see next page) will appear, showing the ports associated with the
trunk group.
78
6. To associate additional ports with trunk groups, repeat steps 2 through 5.
7. When you finish, press the Esc key until you return to the desired screen.
PORT MIRRORING
Using Port Mirroring from the Advanced Management screen, you can mirror
from one port to another port on the switch.
1. From the Advanced Management screen, highlight Port Mirroring and
press the Enter key. The following screen will appear.
2. Highlight Mirror 1, then press Enter. The Port Mirroring Options screen
will appear.
3. With the Mirror To field highlighted, press the Enter key. A Mirror To
Options screen will appear, listing the ports that can be mirrored to.
