14
Document #: LIN_EO_SM_IMPAPERION2424_4607818 – 07/21
Installation
Section 2
4. To add a Top Unit to the Stack Assembly. Ensure that the
Threaded Pins are installed at the corners of the bottom
of the Top Unit.
Threaded
Pin (4x)
5. Using caution, lower the Top Unit using a portable
crane or forklift, onto the Bottom Unit by lining up the
Threaded Pins to the holes on the Bottom Unit.
Non-Stacking Cover With
No Holes On Top
Stack Cover Taller
With Holes
Threaded
Pin (4x)
6. Once the units are in place, re-install the Finger
Assemblies.
7. Install the Conveyor Belt assembly.
8. Install Front Door.
9. Install Loading and Offloading Trays (Loading Tray
Marked with I, Offloading Tray Marked II).
Leg Kit 4-Places
Offloading
Tray
Loading
Tray
Conveyor
Belt
For Floor Installation
1. When placing the Oven on the floor, use the Long Leg
Kit with Casters on the Bottom Unit. If Stacking Option is
being used, ensure the Long Leg Kits are on the Bottom
unit. The Bottom Unit will have the Stack Top Cover
Option installed.
Non-Stacking
Cover With No
Holes On Top
Stack Cover Taller
With Holes
Long Legs With
Casters
2. Remove Front Door, Upper and Lower Fingers and
Conveyor Assembly from the Top and Bottom Units. The
removal of these items will make the installation of the
Top Unit on the Bottom Unit easier to place.
Содержание Impinger Aperion 2424E
Страница 44: ...44 Document LIN_EO_SM_IMPAPERION2424_4607818 07 21 Notes ...
Страница 45: ...Document LIN_EO_SM_IMPAPERION2424_4607818 07 21 45 Notes ...
Страница 46: ...46 Document LIN_EO_SM_IMPAPERION2424_4607818 07 21 Notes ...
Страница 47: ...Document LIN_EO_SM_IMPAPERION2424_4607818 07 21 47 Section 8 Diagrams THIS PAGE INTENTIONALLY LEFT BLANK ...