Lincoln Impinger Aperion 2424E, Руководство по обслуживанию

Страница: 33 / 48

Document #: LIN_EO_SM_IMPAPERION2424_4607818 – 07/21 33
Section 6 Operation and Programming
SETTINGS MODE
Settings mode allows the operator to change the oven
settings such as Temperature unit of measure or Belt
direction. The factory temperature unit of measure is
Fahrenheit.
1. Press the Cog or Settings mode button on the Home
screen. (Figure 20 and Figure 21)
Figure 20
Figure 21
2. Enter the password by touching the numbers on the
password screen. The password is: 4-5-8-7-5-6. This
password is pre-set at the factory and is not changeable.
(Figure 22)
Figure 22
3. Temperature Unit of Measure - Touch the white circle in
the oval button on the Settings display that shows the
temperature measure. The Fahrenheit or Celsius symbol
will change to correspond to the desired temperature
unit of measure. (Figure 23)
Figure 23
4. Belt Direction - Touch the white circle in the oval button
on the Settings display that looks like a mini conveyor.
The mini conveyor will change to correspond to the
desired belt direction. The new belt direction is now set.
5. Software Update - Press the “Software” button
highlighted below in (Figure 24) to update the UI to the
newest version.
Figure 24
To perform an update, a USB drive containing the update
must be plugged into the back of the touch screen. If a USB
drive is not plugged in, or if the drive does not contain the
files for a software update, the screen as shown in (Figure
25) will display, once the “Software” button is pressed.