Lincoln Impinger Aperion 2424E, Руководство по обслуживанию

Страница: 30 / 48

30 Document #: LIN_EO_SM_IMPAPERION2424_4607818 – 07/21
Operation and Programming Section 6
Figure 4
2. The oven is now in pre-heat mode and the oven heaters
will start-up. The temperature settings appear on the
screen. You will see the temperature of the oven and
the temperature increasing up to the set-point.
The
conveyor does not move in pre-heat mode.
A. To exit pre-heat mode, press and hold the “X”
button until the screen returns to Home Screen.
Figure 5
B. When the oven reaches the set-point temperature,
the conveyor belt will start to move. The display
will show the selected set-point temperature, fan
speeds, and belt speed (cook time).
3. Oven Soak – allow the oven cavity to soak for an
additional 5-10 minutes before loading food
4. Load Food – The oven is now ready for cooking. Please
use the proper equipment to load and unload food from
the conveyor. The conveyor will be hot to the touch.
Pans or trays exiting the oven will be VERY HOT and are
a burn hazard. Please use an oven mitt, pan gripper or
other utensil to remove.
Figure 6
ECO MODE
Eco mode allows the operator to save energy by stopping the
conveyor belt from moving during less busy operating times.
1. Press the Leaf button on upper left side of the Recipe -
Ready screen (Figure 7). The screen will change to Eco
Mode (see Figure 8). The conveyor will stop moving
while the temperature in the cavity should remain
unchanged.
2. To re-start the conveyor, press the X button on the Eco
Mode screen and the Recipe screen will re-appear.
Figure 7
Figure 8