Lincoln Electric K2532-1, Руководство оператора

Страница: 18 / 118

INSTALLATION
ROUTINE WELDING MACHINE PREPARATION
ELECTRIC SHOCK CAN KILL.
1. Disconnect input power to the machine.
------------------------------------------------------------------------
2. M achine p olarit y setting: Set to DC electrode p ositive
p olarit y p er the machine ʼ s Instruction M anual.
3 . G as selection and f low rate: Connect 100% welding
grade argon gas su pp l y to the machine ʼ s gas solenoid
valve. Set the su pp l y regulator to deliver a gas f low rate
o f 20 to 50 SCFH thru the s p ool gun.]
4. Fli p the machine ʼ s wire drive selector switch ( behind the
access door ) to " M agnum® 100S G ". ( See Figure A.4 )
FIGURE A.4
WARNING
PREPARING THE SPOOL GUN
ELECTRIC SHOCK CAN KILL.
1. Disconnect input power to the machine.
------------------------------------------------------------------------
2. The Conical S p ring is used as the s p ool brake onl y when
f eeding the stronger and harder aluminum allo y 5 3 56.
The Conical S p ring must be removed f rom the s p ool gun
whenever using the so f ter aluminum allo y 404 3 .
WARNING
A-10