- - 8
6. Insert the PLASTIC BOTTOM COVER
(#38, #39) into the UPRIGHT TUBE (#3, #4),
vertically.
Notice: Please do not tighten the bolts and
nuts until all the assembly steps are
completed.
10. Use WRENCH W / SCREW DRIVER to lock
the HANDLEBAR PLASTIC BOTTOM
COVER (#13, #14) onto the COMPUTER (#5)
with SCREW (#102) .
11. Lock the PLASTIC BOTTOM COVER (#38,
#39) onto the MAIN FRAME (#1) With the SCREW
(#
152
).
7. Insert the
HANDLEBAR BOTTOM COVER (#13, #14)
into the UPRIGHT TUBE (3, 4) separately.
8.
Connect the signal lines(#110, #113, #144) on both side
of the COMPUTER (#5) and the signal lines(#111a, #114a,
#145a) of the UPRIGHT TUBES (#3, #4); then insert the
COMPUTER (#5) into the left and right upright tube
.
9. Put the BOLT (#63) and the WASHER (#57) together,
then lock the COMPUTER (#5) onto the UPRIGHT TUBES
(#3, #4) with #6 ALLEN WRENCH.
Notice: Please don’t tighten the bolts and nuts until all
the assembly steps are completed.
STEP 4:
STEP 5:
STEP 6:
Содержание D 11.0 Performance
Страница 1: ... 1 OWNER S MANUAL ...
Страница 26: ... 26 EXPLODED DRAWING ...