Lime Pro-Equipment D 11.0 Performance, Руководство пользователя

Страница: 18 / 29

- - 18
6-4. Manual playground: the distance of per loop is 400m. (1 point=20m)
6-5. Manual: The user can set all of the work line, the program will display M, the dot matrix will
show the revolving lamp.
6-6. The time default will show 0:00 if the user don’t press the mode key of the Manual or program.
When we press the start key, the program will begin to calculate the data and the signal will
output as per the program profile.
6-7. Profile takes the principle of the middle location and display mode by 8*8 dot matrix.
6-8. The working state when we choose the Program:
6-8-1. 3s before the newline of the profile, the data of the incline/speed window will be always
flickering until the next newline begins.
6-8-2. When we choose the program and press the start key, the orientation and control of
INC/Speed will carry out automatically as per the profile curve of program display on the LED
Bar. Meanwhile, INC/Speed will adjust and orientate automatically.
6-8-3. Each program has 20 segments, the practice time of every segment is 1min (when time is
showed with count up). 20 segments finished is 1 loop. Every data will be clear when we press
the stop key during practice of the program.
6-8-4. The practice time of each segment is the time set up / 20min if the time is set as count down
mode; when time count down to zero and restart, the practice time of each segment is 1min.
6-8-5. When the program is carrying out, we can press the speed up/down key to adjust the speed
data for each segment, the LED bar and speed will adjust simultaneously.
7. User program:
The Program display U “n” (n from number 1- 3 )
When process U1~U 3 Program, Speed / incline Profile will display per 5s interval
7-1. Press “mode” key” to enter into the setting of models then the Profile display glittering.
Time→ Speed Profile 1~20 BAR → incline Profile 1~20 BAR → TIME
7-2. When user program have set, press “KM/M “key to exchange, all the programs the user set
before are clear off. The user must reset programs.
7-3. When not press mode key, the time default display 0:00; press start key, the program will
calculate all kinds of data, and output the message according to the profile chart.
7-4. Press mode key, the flash will present according to the segment, press up
、
down key to set
the profile, the graph won’t stop until all 20 programs finished setting, or press start key for
releasing from the setting mode, the profile set up will save to EEPROM in case take out the
database
7-5. When we choose the program and press the start key, the orientation and control of
incline/Speed will carry out automatically as per the profile curve of program display on the
LED Bar. Meanwhile, incline/Speed will adjust and orientate automatically.
7-6. A loop including 20 segments, press the “stop” key to stop it during it is running.
7-7. The next speed and incline will be flashed before 3s when it is newlining.
7-8. The practice time of each segment is the time set up /20min if the time is set as count down
mode; when time count down to zero, time count down is not set and restart, the practice time