Lime Pro-Equipment D 11.0 Performance, Руководство пользователя

Страница: 17 / 29

- - 17
5-8-2. When calories is calculated by Count up, the counting range is 0
～
999, it will be clear and
calculate once more if it is beyond the range. When calories is calculated by Count down, the
setting range is 5.0~995, step ±5. When count down to zero, alarming twelve times and jump
to setting state, motor stop.
5-8-3. CAL=0.0049*speed*time*
（1+?%）
Time unit: seconds; ?% is motor incline.
5-9:
5-9-1. It will display in Multi-data (incline, pulse) window. The motor incline will be up and down if you
press the incline up and down key.
5-9-2. Incline regulation: adopts manual into self-regulation program. Press INCLINE UP/DOWN
+STOP 5s simultaneously in the stand by state, it will directly enter the INCLINE self-
regulation.
Regulation process:
5-9-3. Display “Inc” (Speed window), “Hi” (Time window), the Max. data of incline VR (INC / PULSE
window) and the actual value of incline VR (CAL window) in the seven segment display
window.
5-9-4. Display “Inc” (Speed window), “Lo” (Time window), the Min. data of incline VR (INC / PULSE
window) and the actual value of incline VR (CAL window) in the seven segment display
window.
5-9-5. When e3 or e4 display in the regulation process, Pls. Open the safety key or restart the power
to leave the regulation process.
5-10. PULSE:
5-10-1. The window will be clear and display “P” if no any signal output for 8s.
5-10-2. If the input signal >240 and <40, the window will be clear and display “P” if it is continuing for
10s.
6. Profile setting and program control
6-1. Setting Bar + Loop mode; When we adjust work line with up, down key, it will enter display bar
mode, 5s later, it will get back to display loop mode.
6-2. The window will show loop “L “ when one loop is finished. The counting range is L1~L99.
Showing 3s later, It will display loop. If the loop display and work line adjustation are working
simultaneously, the main display is still loop, but the work line is adjusted at the same time.
When the loop display is over, it will display by bar, loop, loop/bar, etc 3 modes.
6-3. Manual revolving lamp
Anticlockwise and circular display. The lamp will be lighted ordinally from the first light when it is start, when
the first loop is over, the lamps will turn off, then begin once more with cycle.