Lime Pro-Equipment D 11.0 Performance, Руководство пользователя

Страница: 16 / 29

- - 16
are showed in the middle of dot matrix. The computer will be open too, the details are: 3 (bi) –
2 (bi) -GO - START.
5-3. Scan function:
5-3-1. In the START MODE, it will display cycledly “incline / speed profile, multi-data (incline / pulse,
cal / dist) for each 5s. The relative indicator light will be lighted when we choose the specific
function; when we press the incline key, the indicator light of the compound function will
transform into the function which the key will show.
5-4. Program function:
5-4-1. It will show a playground when it is in MANUAL state.
5-4-2. It will show profile in the dot matrix LED.
---Program, user display Incline / Speed profile. Incline / Speed profile are both sharing
window.
---User program take the use of speed/incline up, down key to adjust the incline / speed
profile.
---The exercise time which the program preset is 20 min. When the operating time is set,
the operating time per section is average. If it is not set, 1 min per section.
5-5. Speed:
5-5-1. Display maximum range as min / max speed options.
5-5-2. Speed up / down step ± 0.2 Km /±0.1 Mile.
5-6. TIME
5-6-1. Time is calculated by Count up & count down (goal), if time is set, it will be calculated by Count
down; if not, it will be calculated by Count up.
5-6-2. When time is calculated by Count up, the counting range under the manual is 0
：
00
～
99
：
59it
will stop when the operating time is up to 99:59, the speed window will display “End” and flicker
40 times, tweeting twice, 50s later, all the window will be clear into the stand by state. During
the 50s, if any keys be pressed, it will get back to the stand by state.1 min is preset per section
under the program of P1~P12, U1~U3. (1 *20=20 min)
5-6-3. When time is calculated by Count down, the setting range is 05:00~99:00. When count down
to zero, alarming twelve times and data of the window will be flickering, everything will stop
and the motor will stop too.
5-7. Distance
5-7-1. Distance is calculated by Count up & Count down. Distance will be calculated by count down if
it is preset. It will be calculated by count up it isn’t preset.
5-7-2. When distance is calculated by Count up, the counting range is 0.00
～
99.9. It will be clear and
calculate once more if it is beyond the range.
5-7-3. When distance is calculated by Count down, the counting range is 1.00
～
99.0. When count
down to zero, alarming twelve times and data of the window will be flickering, everything will
stop, power is disable and motor stop.
5-7-4. Setting distance: press mode key, data flash.
5-8. Calories
5-8-1. Calories is calculated by Count up & Count down. Calories will be calculated by count down if
it is preset. It will be calculated by count up it isn’t preset.