- - 19
of each segment is 1min.
a) Manual profile display:
b) 8*8 profile area:
Error message: display on speed window.
8-1.
E1: The program will stop automatically when press “start” key but no speed program input within
10s.
8-2.
E2: Either the EEPROM nor the ID code is wrong, or can not reading; this action won’t accept
unless it last for 5s.
8-3.
E3: Incline VR value is not changed when revise it in 6s in a row.
8-4.
E4: Incline VR of A / D value is reverse when reversing.
To press the any key to exit when E1 appear
To press the enter key 2sec to exit when E3
、
E4 appear, then come back to stand by state.
9. Operation instructions for Multimedia player
Keys instruction:
There are 10 keys from this system, including “INPUT”,
/ENTER, “GO BACK”, “VOL-“,
“VOL+”, ▼, ▲,
,
, ”MEDIA/POWER” .
9-1. The display will be in loading status when the treadmill is running. About 2 seconds later, the TFT
window will display two icons: Memory and Setup. You can insert the SD/MMC card into the card seat or
insert the Flash disk to the USB port. Thus, the screen will display four icons: SD, USD, Memory and Setup.
Pls refer to Picture 1.
Picture 1 Picture 2 Picture 3
9-2. You can choose SD, USD, Memory and Setup by
,
, confirm your choice by
/ENTER, then it will
go to the son menu. As shown by Picture 2.
9-3. If you choose “Setup”, you can select the items circularly by ▲, ▼, these items includes “language->
Содержание D 11.0 Performance
Страница 1: ... 1 OWNER S MANUAL ...
Страница 26: ... 26 EXPLODED DRAWING ...