Lightware HDMI20-OPTC-RX220-Pro страница 58 Скачать руководство пользователя

Страница: 58 / 71

7. Firmware Upgrade

HDMI20-OPTC series – User's Manual

Step 2. Select device.

The following step is to select the desired device(s). The available and supported devices are searched and

listed automatically. If the desired device is not listed, update the list by clicking the

Refresh

button. Select

the desired devices: highlight them with a

yellow cursor,

then click

A tick mark can be seen in the

Added

column if the device was added by the user previously.

Firmware Components

The firmware components of the selected devices are listed on the following screen: installed and update

versions. (Update version will be uploaded to the device.)

Add a device by clicking on the

Add device

button. The previous screen will be shown; select the desired

device(s) and click on

Remove a device by selecting it (highlight with yellow) and click on

Remove device

button, or click on

Remove

all

button to empty the list.

Enabling

Factory reset

will perform factory default values for all settings in the device. Three different status

can exist:

▪

Enabled by user

: all settings will set to factory default values.

▪

Disabled by user

: your settings will be saved and restored after upgrading.

▪

Enabled by default and not changeable by user

: firmware upgrade must perform a factory reset to apply all

changes coming with the new firmware version.

Click on the

Next

button to continue.









Содержание HDMI20-OPTC-RX220-Pro








































































Результаты поиска

Содержание HDMI20-OPTC-RX220-Pro

Отзывы:

Похожие инструкции для HDMI20-OPTC-RX220-Pro

Бренды по названию

Популярные бренды

Lightware HDMI20-OPTC-RX220-Pro, Руководство пользователя

Результаты поиска

Содержание HDMI20-OPTC-RX220-Pro

Отзывы:

Похожие инструкции для HDMI20-OPTC-RX220-Pro

Бренды по названию

Популярные бренды