Lightware 91560001, Руководство пользователя

Страница: 47 / 126

5. Software Control - Lightware Device Controller UMX-HDMI-140 series– User's Manual 47
Applied firmware package: v1.2.0 | LDC software: v2.4.1b7
5.8.5. Infra
ATTENTION! The device has no built-in Infrared receiver and transmitter. For the complete usage attach
an IR emitter unit to the IR OUT and an IR detector unit to the IR IN connectors.
Infra-Red (IR) receiver and transmitter options can be found on this tab. There are three submenus are
available under it:
IR codes
,
Ports
, and
Clear all IR codes
. #infra #infrared #ir
IR Codes
User can set the name of the IR code, the fingerprint (hash), and the repeat timeout in ms, as well as actions
can be ordered to each IR codes.
IR codes window in Control menu
Description Function
ID Code number.
Name You can give an unique name for the desired code.
Fingerprint (hash) Fingerprint code in pronto hexa format.
Detected Indicator gives feedback about the given IR code is detected currently.
Repeat timeout (ms) You can set a timeout to avoid the involuntary code recurrence.
Actions
Action buttons for the desired IR code:
Save
: saving the fingerprint.
Cancel
: canceling the fingerprint.
Learn
: learning the detected IR code.
Detected IR fingerprints
You can check the detected IR codes in this panel. Pushing
Clear
button
deleting all current fingerprints and switch on or off the automatic
scrolling with the
Autoscroll
pipe.
20 fingerprints can be stored in the device at the same time. Each of them can be ordered to an action in
Event Manager .
Learning IR Code (hash)
Step 1.
Connect the IR detector unit to the IR IN port of the switcher.
Step 2.
Click on the
Learn
button on the
Infra
tab in the LDC.
Step 3.
Turn the remote controller to the IR detector. A pop-up window appears in LDC - press your remote
button to learn.
Step 4.
Once the code is received, a new window pops up in LDC - learning completed. Click
OK
to continue.
Step 5.
Optionally type a unique name for the code in the
Name
text box. The default name is code#, e.g.
code0.
INFO: UMX-HDMI-140 model can handle the IR codes in hash format.
  
