Page | 5
Hardware Bags -
Locate all hardware bags for assembly. Bags will be labeled
Figure 1
through
Figure 11
. Tools have been provided to assist with product assembly.
If you are missing any parts, assembly bags or need assistance with assembly please call LifeCore
Fitness at 1-888-815-5559.
Tools Required:
17 mm socket wrench: 2JAX
17 mm wrench: 2JAW
Philips screw driver: 2JAY
6mm Allen wrench: 2JC7
4mm Allen wrench: 0J3P
Tube of grease: 2K81
Step 1:
Tools Needed:
6mm Allen wrench: 2JC7
17 mm socket wrench: 2JAX
Note:
Ensure that all wires are properly
connected inside console tube. Be careful to
not
pinch wires
. Additional help maybe
needed to help line up holes to frame.
Note: Do not tighten screws until you
have fully completed Step 2.
1) Locate bag labeled
Figure 1
.
2) Locate console tube.
3) Slide console tube into main frame.
4)
(See Figure 1)
Connect upper console
wire to lead wire assembly coming from
frame.
5) Secure console tube to frame using Qty.
three
10x20
washers
and
three
M10x80mm short hex head bolts and
extend them through the holes on the
right side of the frame and console tube.
Use Qty. three M10x1.5 crown nuts to
lock M10x80mm hex head screws on
left side.
6) Use Qty. three M10x120 long hex bolts
to secure console tube to the main
frame.
