Page | 8
Step 6:
Tools Needed:
Philips screw driver: 2JAY
Note:
Do not over tighten M5X0.8-12 screw,
this will damage bracket cover.
1) Locate bag labeled
Figure 6
.
2) Locate bracket covers.
3) (
See Figure 6
) Attach bracket cover to
the handrail assembly by lining up the
hole and using a Philips screw driver to
tighten Qty. one M5X0.8-12 screw into
handrail assembly. Repeat for other side.
Step 7:
Tools Needed:
6mm Allen wrench: 2JC7
1) Locate bag labeled
Figure 7
.
2) Locate left and right handle bars.
3) (
See Figure 7
) Attach left handlebar to
handlebar assembly using Qty. three
M8X16mm hex bolts. Using a 6mm Allen
wrench, tighten hex bolts tight.
4) Repeat for other handlebar.
