In the
No Connection
status, the unit does not connect the stages, but also does not
disconnect them if the operation requires it.
In the
Disconnection
status, it disconnects all the stages and does not allow them to connect.
The
key increases the digit value.
The
key decreases the digit value.
The
key skips to the previous digit.
The
key skips to the next digit.
Press
to validate the data; the
symbol disappears from the display.
Lo
Value
and
HI
Value:
Maximum value:
80ºC.
Minimum value:
0ºC
If the value entered is lower than the minimum value or higher than the maximum value,
the backlight of the display flashes and the value entered is replaced with the minimum or
maximum value, or with the last value validated.
Press the
key to access the next programming step.
If no keys are pressed for 5 minutes, the unit switches to the simulation screen,
“5.27.-
SIMULATION SCREEN”
.
99
Instruction Manual
Controller MASTER control VAR FAST
