The
key shows the previous option.
Press
to validate the data; the
symbol disappears from the display.
Press the
key to access the next programming step.
If no keys are pressed for 5 minutes, the unit switches to the simulation screen,
“5.27.-
SIMULATION SCREEN”
.
5.11.- VOLTAGE TRANSFORMATION RATIO
In this point the primary and secondary value of the
voltage transformer can be configured.
Press the
key to enter editing mode. It is
identified by the
symbol and the blinking of
the digits to be modified.
The
key increases the digit value.
The
key decreases the digit value.
The
key skips to the previous digit.
The
key skips to the next digit.
Press
to validate the data; the
symbol disappears from the display.
Voltage primary:
Maximum
value:
99999.
Minimum
value:
1.
Voltage secondary:
Maximum
value:
99999.
Minimum
value:
1.
Maximum possible voltage ratio:
1000.
NB:
The voltage ratio is the ratio between the primary and secondary voltage.
Maximum value of the current ratio x the voltage ratio:
200000.
If the value entered is lower than the minimum value or higher than the maximum value,
the backlight of the display flashes and the value entered is replaced with the minimum or
maximum value, or with the last value validated.
85
Instruction Manual
Controller MASTER control VAR FAST
