Network Settings
19
5.3.1 SNMP Communications Menu
Use the SNMP Communications Menu to enable
authentication traps and view or change
communities and trap communities, events and
parameters.
Refer to
Table 13
for details on each menu option, as
well as the following sections:
•
Section 5.3.2 - Display/Modify SNMPv1/v2c
Communities
•
Section 5.3.3 - Display/Modify SNMPv1/v2c
Trap Communities
•
Section 5.3.4 - Display/Modify SNMPv3
Settings (Units with IS-WEBCARD Only)
•
Section 9.2 - Events and Parameters
(for details on viewing Support Information)
Table 13
SNMP communications menu
Parameter
Description & Telnet Menus
Authentication Traps
Enables authentication traps to receive security alerts when the Web card detects
a request with an invalid community string.
RFC-1628 (UPS) MIB
Enables the RFC-1628 (UPS specific information) MIB on the Web card for
querying of information in that MIB. This can be enabled or disabled independently
of the Liebert Global Products MIB.
• Traps
This option enables the RFC-1628 traps to be sent when an alarm event occurs on
the device. The parent option must be enabled for this to also be enabled.
Liebert Global Products MIB
Enables the Liebert Global Products MIB (Enterprise Specific) for querying of
information in that MIB. This option can be enabled or disabled independently of
the RFC-1628 MIB.
• Condition Traps
Enables event condition traps to be sent per the LGP MIB. The parent option must
be enabled for this to also be enabled.
• System Notify Trap
Enables system traps to be sent per the LGP MIB. The parent option must be also
enabled for this to be enabled.
Heartbeat Trap Interval
Specifies how often a heartbeat trap will be sent to show that the device is online
and functioning normally.
Display/Modify SNMPv1/v2c
Communities
View devices that have permission to access the Web card, identified by IP
address or hostname, read/write permission and community string. Up to 20
devices may be configured for access.
See
5.3.2 - Display/Modify SNMPv1/v2c Communities
.
Display/Modify SNMPv1/v2c
Trap Communities
View devices that are configured to receive notifications from the Web card,
identified by IP address or hostname, trap listen port and community string. Up to
20 devices may be configured to receive traps.
See
5.3.3 - Display/Modify SNMPv1/v2c Trap Communities
.
Display/Modify SNMPv3
Settings
View devices that have permission to access the Web card, identified by IP
address and other parameters.
See
5.3.4 - Display/Modify SNMPv3 Settings (Units with IS-WEBCARD Only)
.
Support Information
View a list of all supported events and parameters for the Liebert equipment
through any interface. Depending on the Liebert IntelliSlot Web card, the list might
include SNMP, Modbus or BACnet.
See
9.2 - Events and Parameters
.
SNMP Communications Menu
-------------------------
1: Authentication Traps
yes
2: RFC-1628 (UPS) MIB
enabled
3: -
Traps
enabled
4: Liebert Global Products MIB
enabled
5:
- Condition Traps
enabled
6:
- System Notify Trap
enabled
7: Heartbeat Trap Interval
24 hours
8: Display/Modify SNMPv1/v2c Communities
9: Display/Modify SNMPv1/v2c Trap Communities
A: Display/Modify SNMPv3 Settings
B: Support Information
<ESC>: Cancel menu level
Please select a key ?> 1
Содержание IntelliSlot
Страница 2: ......
