96
ENGLISH
I
n
st
a
lli
ng
ACP Lo
n
wo
r
ks
- If you press “SET“ button, the set power management method will be applied to the system.
But if there is no “SET” button input for certain time (about 10 sec.), the setting will not be
applied to the system, it returns to the previous screen, and the previously set method will be
used.
Setting whether to display cycle information
In LG ACCS, which is the operation program of the ACP Lonworks, you can monitor the cycle
information of the outdoor unit connected to the ACP Lonworks. But, to see the freezing cycle
of the outdoor unit, you must make a maintenance contract with a maintenance company in
advance, and a separate device installation may be required.
- When you press the 'SET' button of the ACP Lonworks, menu screen will be displayed.
Use up and down (
▲
,
▼
) buttons to select [Contents], and press “SET” button again.
While [CYCLE] is selected, if you press “SET” button, you can set to view the outdoor unit
cycle information.
PLNWKB000
n
@i
c
f
lon@gw@i
^
^
{s @cycle}
notHPI@O@useHQI@Z@P
{c
}
cycle
f
@a
chV@usage
P
P
d
Click SET
button
Click SET
button
NOTE
!
• To see the outdoor unit cycle information, you need to replace PI485 and set the outdoor
number that can see the cycle information.
Содержание V-NET PLNWKB000
Страница 100: ...100 ENGLISH Installing ACP Lonworks E may be changed ...
Страница 113: ...ENGLISH 113 Installing ACP Lonworks When the program is run properly the following screen is displayed ...
Страница 183: ......
