manualshive.com logo in svg

LG V-NET PLNWKB000, Инструкция по установке и эксплуатации

Поделиться
Скачать
LG V-NET PLNWKB000 Скачать руководство пользователя страница 8

8

ACP Lo

n

wo

r

ks FUNCTIONS AND SPECIFICATION

ENGLISH

ACP  Lonworks Components

Inside the packaged box of the ACP Lonworks, there are the components as in the following
drawing. Open the packaged box of the ACP Lonworks, and check if all of the corresponding
components are included.

NOTE

!

• May be different from the image that has been shown and items sold separately parts.

• Power Supply Adaptor and Power Cord are not included in PLNWKB100 (AC24V power use)

PLNWKB000

ACP Lonworks

(ACP Lonworks Gateway)

Quick Guide

Power Supply Adaptor 

Input: 100~240V 

50/60Hz 1.2A

Output: DC 12V 

3.33A, 40W MAX 

Power Cord

250V AC, 3A 

ACP Lonworks

User’s Guide

P/NO : MFL67842102

www.lg.com

INSTALLATION/USER MANUAL

TYPE : ACP Lonworks (ACP Lonworks Gateway)
MODEL : PLNWKB000, PLNWKB100

• Make sure to read the cautions for safety before installation and use, and use 

it correctly.

• It is intended to keep protect the safety of the installer and user and to 

prevent the property damage, etc.

• After reading the user manual, please keep it at a place where user can 

access any time.

Содержание V-NET PLNWKB000
























































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды