LG V-NET PLNWKB000, Инструкция по установке и эксплуатации

Страница: 27 / 183

O p e ra ti ng ACP Lo n wo r ks with ACCS
ENGLISH
27
Setting the schedule
It is the function to perform the reserved operation at the specified time by specifying the opera-
tion of the air conditioner. For example, for the case of the school, the air conditioner automatical-
ly starts and stops at the specified time by setting the schedule to attending school and returning
home.
The unnecessary operation and management cost of the air conditioner can be reduced by this
schedule function, and it can effectively save the energy because it is used only when necessary.
Schedule can be set by logging in as super user or manager.
NOTE
!
Schedule maintenance time
• When setting the schedule, 1~3 minute schedule setting is maintained for time the actual
schedule is set.
• For example, when you set the schedule for the unit to be turned off at 5:00, the operation
is turned off from 5:00 to 5:03. Therefore even when you try to operate the unit with the
wired remote controller, it may be turned off.
CAUTION
Saving after the system setup
• When ‘group setting completed’ button is pressed in ‘system setting’ menu, all schedule
information currently set will be initialized, so be careful.
Time of ACP Lonworks
• When a user access ACP Lonworks through web browser, the time of PC and ACP
Lonworks are automatically synchronized, and ACP Lonworks executes schedule function
based on this time. Therefore, always maintain the time of PC to be the current time.
!