76
206-4256
MPI
DISPLAY
CONTROL 2
IN 2
IN 1
OUT
LAN
DIGITAL
AUDIO
POWER
DISPLAY
CONTROL 1
IR IN
SERVICE
AV IN
AUDIO
LINE OUT
ANTENNA/
CABLE IN
USB IN 2
USB IN 1
Reference: STB-2000 Jack Panels
AV (AUDIO/VIDEO) IN
(3.5 mm jack) Connect composite audio/
video output from external device. Use A/V
adapter cable provided.
ANTENNA/CABLE IN
Connect to Antenna/CATV.
SERVICE
Restricted to service updates.
DIGITAL AUDIO
Use for amps and home theater systems. Note:
When the STB is OFF, this port is not enabled.
LAN
Use for video IP and/or network connections.
POWER (DC IN)
Use 19V 2.1A
AC/DC
power adapter (provided).
AUDIO LINE OUT
(3.5 mm jack) Connect audio equipment to use fixed line
level audio output. See Reference section, “External
Audio Line Out Specifications,” for further information.
HDMI OUT
Use HDMI cable (provided) to connect
to display panel HDMI input.
IR IN
(3.5 mm jack) Connection for external IR receiver
(optional). Use when IR pass-through via RS-232
connector is not supported by the LG display panel.
See Reference section, “External IR Receiver
Specifications,” for further information.
DISPLAY CONTROL 1
(3.5 mm jack) Use TLM cable provided to connect
to LG Public Display/Commercial Monitor display
panel’s RS-232 connector. *
* Only one DISPLAY CONTROL connection should be used depending on the type of display panel
to be controlled. Refer to “STB-2000 Cabling Connections” on pages 7 to 8, and/or see Reference
section, “Display Panel Specifications,” for information on determining the appropriate connection.
MPI
When the STB is in Pass-through Mode, the MPI
function enables an external MPI control device
(i.e., VOD/PPV STB, etc.) to control the STB.
HDMI IN 2 & 1
Connections for HDMI output
from external devices.
USB 2 & 1
Insert USB memory device for software updates,
cloning purposes, FTG Mode via CPU configuration,
picture/music entertainment, etc., as applicable.
DISPLAY CONTROL 2
(RJ-12 port) Use MPI/MTI cable provided to
connect to LG Hospitality display panel’s MPI
port or commercial non-LG display panel’s
MTI (DATA) port. *
STB-2000 LED
STB-2000 Front Panel
STB-2000 Rear Panel