LG STB-2000 Скачать руководство пользователя

Страница: 36 / 86

206-4256

Custom Master STB Setup (Cont.)

Custom Master STB Setup Procedure

1. Turn ON the STB/display panel.

The next step depends on whether the EZ-Manager Wizard appears on

the screen when you turn ON the STB/display:
• If the wizard is displayed, the STB is in the required factory default

state. Exit the wizard, and then continue with step 2.

• If the wizard is not displayed, restore the STB to a factory default

condition before continuing with this procedure. See Reference section,

“Restoring Factory Defaults on the STB(s),” as necessary, for further

information.

2. Set Installer Menu items.

This step provides specific instruction only on the Installer Menu items

that should be set on a Master STB. Refer to pages 25 to 34 for detailed

information on all Installer Menu items.
a) Use the Installer Remote to access the PTC Installer Menu (see

“Accessing the Installer Menu” on page 25 for further information).

b) Set Installer Menu item

003 BAND/AFC

, as appropriate.

• Broadcast: Set to 0.

• HRC: Set to 2.

• CATV: Set to 1 (default).

• IRC: Set to 3.

c) Set any other Installer Menu items that affect your TV programming

network to the required configuration. For example, set the panel

display type (if applicable), enable/disable Aux inputs, set a Start

Channel, etc.
If you intend to use a TLX file for cloning purposes, you may also

configure selected settings in the IP Environment Menu (accessible

from the Installer Menu). See “IP Environment Setup” on pages 56 to

63 for further information. In particular, if you intend to use the Wi-Fi

Zoning feature, you must configure the wireless network connection

as part of the Master STB Setup. However, note that you cannot return

directly to the Installer Menu from the IP Environment Menu; thus, you

may wish to set all Installer Menu items as needed before you access

the IP Environment Menu. Otherwise, you will need to reaccess the

Installer Menu to set additional items.

d) After you have adjusted all Installer Menu item settings as required,

press

once on the Installer Remote to save your changes; then,

press

again to exit the menu.

Typical Installer Menu

Adjust the value for this

Installer Menu item, as required.

003 BAND/AFC 001

(Continued on next page)

STB_2000 PTC INSTALLER MENU

CPU-CTV

000 INSTALLER SEQ 000

UPN 000-000-000-000

ASIC D279

PTC V1.00.020

STB V3.08.00

Содержание STB-2000























































































Результаты поиска

Содержание STB-2000

Отзывы:

Похожие инструкции для STB-2000

Бренды по названию

Популярные бренды

LG STB-2000, Руководство по установке

Результаты поиска

Содержание STB-2000

Отзывы:

Похожие инструкции для STB-2000

Бренды по названию

Популярные бренды