LG STB-2000 Скачать руководство пользователя

Страница: 21 / 86

206-4256

(Continued from previous page)

4. Once all fields are completed as required, you have two

options (see also note below):
• To save the data entered and exit the wizard, use the arrow

keys to select

Exit

and then press

. In the subsequent

pop-up confirmation window, select

Save and Exit

, and then

press

once more. The Pro:Centric application and/or

E-Z Installation data will be downloaded to the TV at a later

time. This option is useful, in particular, if the Pro:Centric

server has not yet been configured.

• To initiate a real-time download of Pro:Centric application

and/or E-Z Installation data, use the arrow keys to select

Next

, and then press

The EZ-Manager Wizard will proceed with the remaining

Pro:Centric application and/or E-Z Installation data down-

load steps, as shown on the Processing the Pro:Centric

Configuration screen.

Note:

With RF configuration, Pro:Centric server data must be

present on the RF channel selected as the TV’s Data Channel

in order for you to select “Next” (you will see a “Data Channel

found” message below the signal strength indicator). With IP

configuration, Pro:Centric server data must be present via the

wired LAN cable connection in order for you to select “Next”

(you will see a “IP server found” message below the Port field).

When the Pro:Centric configuration is complete, an EZ-Manager

Configuration Complete screen is displayed, and after 10

seconds, the wizard exits, and the STB turns OFF.

Note:

With the EZ-Manager Configuration Complete screen on

display, you also have the option to manually turn off or reboot

the STB. If desired, select

Turn Off

Reboot

, respectively, and

then press

on the Installer Remote.

EZ-Manager Wizard (Cont.)

EZ-Manager Wizard

EZ-Manager Configuration Complete

Pro:Centric Application

Maintenance Files

GEM application downloaded

STB-2000_Config.tlx

Installed Components

The TV will turn off in 3 second(s).

Reboot

Turn Off

EZ-Manager Wizard

Processing the Pro:Centric Configuration...

Application files

Maintenance files

Warning - Do not remove AC power or the signal cables during these steps

In progress...

Pending...

Retrieving files from data channel 75

Downloading the Pro:Centric application files takes a few minutes.

Please wait...

EZ-Manager Wizard

Pro:Centric Mode

Channel Number

Signal Strength
Signal Quality

GEM

< >

Back

Exit

Pro:Centric Manual Configuration

No signal

Are you sure you want to exit the wizard?

If you select ‘OK’ now, your settings will be lost

and you will exit the setup wizard.

This window will close and you will be returned to

the previous page automatically in 2 seconds.

Save and Exit

Cancel

USB Configuration

The USB Download Menu provides options that enable you to download individual configuration or

software files to the STB.
Each of the USB Download Menu functions requires that you have the appropriate file(s) loaded

on a USB memory device. If you wish to perform a software upgrade from the USB Download

Menu, the software upgrade file(s) must be stored in a folder named “LG_DTV” in the root directory

of the USB memory device. TLX/TLL files for cloning or FTG Configuration (.tlx) files should simply

be stored in the root directory of the USB device.

Содержание STB-2000























































































Результаты поиска

Содержание STB-2000

Отзывы:

Похожие инструкции для STB-2000

Бренды по названию

Популярные бренды

LG STB-2000, Руководство по установке

Результаты поиска

Содержание STB-2000

Отзывы:

Похожие инструкции для STB-2000

Бренды по названию

Популярные бренды