LG Multi V ARUN053GF2 Скачать руководство пользователя страница 31

Страница: 31 / 76

Refrigerant Piping Connections

Due to our policy of continuous product innovation, some specifications may change without notification.

The proper design and installation of the refrigerant piping system

is a critical element of the Multi V Space II system. Multi V Space II

requires two pipes between system components – a liquid line and

a vapor line. A properly designed refrigerant piping system ensures

that refrigerant is delivered to the evaporator coils electronic expan-

sion valve (EEV) in a pure liquid state free of gas bubbles. A proper

design also ensures a sufficient refrigerant gas flow rate in the vapor

line that eliminates the possibility of refrigeration oil from collecting in

the vapor lines.

refrigerant Piping Quality assurance

LG’s LATS Multi V software makes designing the refrigerant system

easy. LATS Multi V is a Windows

-based application that assists the

engineer in the design of the refrigeration distribution pipe system,

verifies the design complies with pipe design limitations, applies

capacity correction factors, and calculates the system refrigerant

charge. The piping system can be entered manually into LATS from

a one-line pipe diagram.

To ensure that the refrigerant piping design meets LG’s quality

standards, a LATS refrigerant piping design must be provided

with every Multi V Space II order. Following the installation, if

any changes or variations to the design are necessary, a new

LATS file must be created and provided to LG prior to system

commissioning to ensure the proper pipe size has not changed.

adjusting lats Multi V output for

altitude

When a system is installed at elevations significantly above sea

level, the designer must also consider the impact air density has on

the capacity of the indoor and Space II units. LATS does not de-rate

indoor unit capacity for high altitude applications. Locally accepted

altitude correction factors must be applied to indoor unit capacities.

Design choices

LATS Multi V software is flexible, offering the HVAC system engineer

a choice of two design methods: CAD mode and Tree mode.

CAD Mode

Using the CAD mode, the refrigerant pipe design and layout work is

performed concurrently. Simply import a copy of a plan view drawing

(.dwg format) for floor of the structure into LATS Multi V software.

Multi V air-source units, heat recovery units, and indoor units can be

selected from drag and drop lists and placed on the floor plan draw-

ing(s), and interconnecting pipes between system components will

be drafted directly on the drawing set. LATS will size the refrigerant

piping, certify the design, and provide a detailed materials report and

system schematic. Use the export feature to create a CAD file (.dxf

format) that can subsequently be imported into the building design

drawings.

•

Import the building’s architectural CAD (.dwg and .dxf format).

•

Import building loads from an external file (.xls and .xlsx format).

•

Layout refrigerant piping directly onto an overlay of the building drawing.

•

Automatically calculates pipe segment lengths based on drawing layout.

•

Creates an export image file for import to the building drawing set

(.dxf format).

•

Generates a system engineering report (.xls or .xlsx format).

Tree Mode

Using the TREE mode, the engineer can quickly create a one-

line schematic drawing of the Multi V system. Integration of the

engineered pipe system into the building drawings is done at a later

date by the draftsperson using standard drafting software tools.

•

Import building loads from an external file (.xls format).

•

System components selected using an easy drag and drop

process.

•

Automatically analyzes and checks the design complies with most

piping design limitations.

•

Sizes refrigerant piping.

•

Generates a system engineering report (.xls format).

In either case, LATS Multi V software generates a report file (.xls

format) containing project design parameters, cooling and heating

design day system component performance, and capacity data. The

report calculates the system combination ratio, calculates the system

refrigerant charge, and provides detailed bill of material information

including a list of Multi V outdoor units, air handlers, control

devices, accessories, refrigerant pipe sizes segregated by building,

by system, by pipe size, and by pipe segments.

Figure 30: Screenshot of LATS Pipe System Design Tool in Tree Mode.

Required LATS Multi V Piping Design Software File

refrIGerant PIPInG connectIons

Содержание Multi V ARUN053GF2













































































Результаты поиска

Содержание Multi V ARUN053GF2

Отзывы:

Похожие инструкции для Multi V ARUN053GF2

Бренды по названию

Популярные бренды

LG Multi V ARUN053GF2, Руководство по установке

Результаты поиска

Содержание Multi V ARUN053GF2

Отзывы:

Похожие инструкции для Multi V ARUN053GF2

Бренды по названию

Популярные бренды