16
Installation
3
Ins
talla
tion
LAN connection
Connect the LAN port to an available 10/100/1000 base-T port with
a straight ethernet cable (not supplied). The NET indicator on the
front panel will be lit.
IP Camera connection
Connect the IP camera. After the installation, check the IP camera
settings on the setup menu.
Automatic network configuration
The system can automatically obtain and configure the network
interface via DHCP.
Manually configure network
The system may be manually configured by assigning an IP address,
subnet mask, gateway and DNS.
NOTE
This unit can be supported IPv4 and IPv6 network.
Connecting LKD1000 Controller
This system has a data terminal. Use this port2 to connect keypads
(optional).
RS-485 Terminal
Description
D - (DATA -)
Data Transmission/Reception
D + (DATA +)
Data Transmission/Reception
GND
Shield
Connect the LKD1000 controller to control the system. (Refer to the
manuals of the LKD1000 controller for more details.) The LKD1000
controller has to be connected to the 2 (DATA 2) port as shown
illustration. If you connect the LKD1000 controller to the 1 (DATA 1)
port, the LKD1000 controller will not be activated.
LKD1000 controller connection
Contrôleur LKD1000
RS - 232C
D- D+ G
2
TX+
TX-
D- D+ G
2
Содержание LRN8240D Series
Страница 78: ...AB28 ...