LG LRN8240D Series, Руководство пользователя

Страница: 58 / 78

58 LG Network Client Program
5
LG Ne
tw
ork Clien
t P
rogr
am
ATM/POS Format
The DVR can be set to react to text input from devices such as
ATMs (Automated Teller Machines) and POS (Point of Sale; i.e., cash
registers). This screen allows you to configure the DVR for your input
device.
• Input Channel: Select the mapping camera channel.
• Transaction Start: Enter a Transaction Start string. Refer to the
device manufacturer’s documentation for the text string that
the device first sends when a transaction starts.
• Transaction End: Enter a Transaction End string. Refer to the
device manufacturer’s documentation for the text string that
the device sends when a transaction ends.
• Delimiter: Enter the character(s) that the device uses to
indicate the end of a line. Refer to the device manufacturer’s
documentation for Line Delimiter character(s).
• Ignore String: Enter the any strings of text that you want the DVR
to ignore. Refer to the device manufacturer’s documentation
for text strings that the device sends during transactions, so you
will know which ones you do not want recorded.
• Time Out: Select the Recording end time.
• Relay Output:
-
01 to 04: Outputs the alarm (relay) signal via the RELAY-OUT
terminal. When the DVR detects text input, it triggers output
signals on all the associated Alarm-Out connectors.
- Off: Not used.
NOTE
• ATM/POS Recording Information.
Option setting ATM/POS Recording Action
When the Transaction
Start and Transaction End
options are set.
Recording is started automatically
when the Transaction start data is
detected. When the Transaction
end data is detected, the recording
is stopped after post-alarm time.
When the Transaction
Start and Transaction End
option is not set.
Recording is started automatically
when the transaction data is
detected. When the transaction
data is not detected, the recording
is stopped after post-alarm time
and the time you set in the Time
Out option.
• This option is not supported for model LRN8240D.
Event Popup
• Spot Monitor: Select the event type for the spot monitor display
when the event is activated.
NOTE
This option is not supported for model LRN8240D.
Mail
1. Click the [Setup] button.
2. Set the below options.
• Notification: Mark up to be notified the unit's operating
information according to notification settings by e-mail.
If notification option is not set, the other options cannot be
set.
- SMTP Server: Enter the SMTP Server address.
-
SMTP Port: Enter the SMTP Port Number. Typically the
port used for SMTP is 25. However in some cases it is
better to change this port number for added flexibility
or security. You can edit this port between 1 and 65 535.
-
User Name: Enter the user name.
- Password: Enter the password.
• TLS: Mark up if you want to use the TLS (Transport Layer
Security) function.
-
Mail Address (1 to 3): Enter the mail address.
You can input up to 3 e-mail addresses.
- Sender : Enter the sender.
NOTE
The SMTP Server, SMTP Port, user name or password settings are
optional. The DVR/NVR can send e-mail directly without the use of
an SMTP server or MTA (message transfer agent). In certain cases
all e-mail should be forwarded to a specific SMTP server. Specify
the server host name or IP address in such a case. For more detail
on SMTP setup, ask your network administrator and/or mail service
provider.
3. Click the [OK] button to confirm the settings.
Notification
Mark up when you want to activate the selected option. If the
selected notification option is activate, notify the user about the
information of selected option by E-mail.
• Sensor On: Sends an e-mail when a sensor has occurred.
• Motion Detection: Sends an e-mail when an motion detection
has occurred.
• Text In: Sends an E-mail when the text input is detected.
NOTE
This option is not supported for model LRN8240D.
• Admin PW Changed: Sends an e-mail when the administrator
password has been changed.
• Video Loss: Sends an e-mail when a video signal from the
camera has stopped because of a cable disconnection or
malfunction of a camera.
NOTE
This option is not supported for model LRN8240D.
• Power On/Off: Sends an e-mail when power is on or off.
• Disk Full: Sends an e-mail when the HDD has fully recorded.
Buzzer
Mark up when you want to activate the selected option.
• Sensor: Makes a sound when a sensor occurs.
• Motion : Makes a sound when a motion is detected.
• Text: Makes a sound when the DVR detects text input .
NOTE
This option is not supported for model LRN8240D.
• System: Makes a sound when a cooling fan is not activated or
the HDD has bad sector.