LG Hydro Kit, Руководство по установке

Страница: 71 / 77

System Set-Up
Hydro Kit Installation Manual 71
ENGLISH
Th On Th Off
0 -2 ℃ 2 ℃
1 -6 ℃ 4 ℃
2 -2 ℃ 4 ℃
3 -1 ℃ 1 ℃
• TH on/off Variable, DHW
Setting the step value to adjust DHW temperature gap in heating mode
• Heating temp. setting
At the leaving water control in heating mode, the control reference water temperature position
setting.
• Cooling temp. setting
At the leaving water control in cooling mode, the control reference water temperature position
setting.
• Pump setting in heating
It is a function to help the water pump's mechanical life by putting the water pump's rest time.
Installer setting function to set water pump operation / delay time option in heating mode.
• Pump setting in cooling
It is a function to help the water pump's mechanical life by putting the water pump's rest time.
Installer setting function to set water pump operation / delay time option in cooling mode.
• Forced operation
If the product is not used for a long time, the product will be forced to operate to prevent pump
failure and PHEX freezing.
Water pump off After 20 consecutive hours, disable / enable the logic that drives the water
pump by itself.
• Pump frequency setting (LPM, For Medium Temperature)
Setting water flow rate
Determine the difference between target inlet water temperature and target outlet water
temperature from water flow rate.
Setting value
Water flow rate (l/min)
4 HP 10 HP
50 20~22 45~50
55 23~24 51~55
60 25~26 56~60
65 27~28 61~65
70 29~30 66~70
75 31~32 71~75
80 33~34 76~80
85 35~37 81~85
90 38~39 86~90
92 40 91~92