LG Hydro Kit, Руководство по установке

Страница: 64 / 77

System Set-Up
64 Hydro Kit
CAUTION
There is no disinfection function in Medium Temperature Hydro Kit. So, external control equipment
should be installed for disinfection function.
!
Function text inside
remote
Range
Short explanation
Mid Temp. High Temp.
Data logging
The error history of the connected indoor
unit can be inquired.
Password Initialization
If you forget the user setting password,
you can initialize it in the installer settings.
Refrigerant Leak Sensor
- Not Installed (Default)
- Installed
The installation of the flare coupling part
and the welding part leakage sensor of
the indoor unit is set.
IDU Address Verification
Check the result of Auto Addressing of
outdoor unit with remote control.
CN_EXT
Not use (default)
- Simple Operation
- Simple Dry Contact
- Single emergency stop
- All emergency stop
Depending on DI / DO set by customer
using dry contact port of indoor unit
Function to set external input and output
control.
ODU Function Master
- mastar
- slave (slave default) Setting of outdoor function Setting
function of Master / Slave.
Low Noise Mode Priority
- ODU (ODU default)
- RMC Function to set low noise mode control
subject.
ODU cycle priority
- Not use (Not use default)
- Standby Function to enable or disable the standby
mode of the indoor unit.
Use External Pump
- Not use (Not use default)
- Use Function to set the control of external
water pump.
Pump Prerun/Overrun
- Prerun : 1~10 min
(1 min default)
- Overrun : 1~10min
(1 min default)
Function to circulate the heating water
with a water pump before heat exchange
and set it to reach the appropriate flow
rate.
Estimated energy display
- Clear (Clear default)
- Set
Wired remote control The function to set
whether to display the estimated amount
of power calculated by the product on the
screen.
Pump operation time
Indicates the operation time of the water
pump installed in the indoor unit, and
measures the life of the motor.
IDU operation time
The function to display the operating time
and to measure the life of the product.