LG Aria-24IP, Руководство пользователя

Страница: 21 / 54

●●●●
aria
–
24IP DIGITAL KEY TELEPHONE SYSTEM USER’S GUIDE
21
S
y
st
em
F
e
a
tu
res
Button Procedures
Alarm Reset
Range
To terminate alarm signal while idle state,
At the Alarming Station: Dial 5 6 5
Confirmation tone is heard and the alarm signal is terminated at all assigned stations.
5 6 5
CLI Message Wait (CO Message Wait)
Button Procedures Range
When a call is received with DISA/DID, the Calling Line Identification (CLI) of the incoming call is displayed on the LCD of the
station. If the DISA/DID external party hangs up the call before being answered, the CLI will be stored in the CO message
wait queue in the called party.
To retrieve CLI Message,
Press Call Back key.
The stored message will be shown on the LCD.
To delete the current CLI message and see the next one,
Press CONF soft key.
To make a callback,
Press Hold/Save key.
The stored number is dialed as speed dialing.
To see the next/previous CLI message,
Press - key.
To delete all CLI messages,
Press Speed key twice.
If VMIB message is stored with CLI message, the CLI message will not be deleted by
pressing Speed key .
CONF Softkey
x2
Conference Room
Button Procedures Range
Conference Room allows internal users, and external DDI callers to join into a conference independently without being invited
by a conference supervisor.
To Activate a Conference Room,
Press [Trans/Pgm] 4 3 + Room Number (1~9)
Dial a 5 digit Access Code, if required. (An access code is optional)
Press [Hold/Save] Key
To Deactivate a Conference Room,
Press [Trans/Pgm] 4 4 + Room Number (1~9)
To Join a Conference Room,
An internal Station user may Dial the conference room Code + Room Number (571 ~ 579)
An external Party must enter via a pre-programmed DDI with the Conference Room as the
Destination
To Leave an Conference Room,
Press - key.
571 ~ 579
4 3 (1~9)
4 4 (1~9)
CO to CO Call time Extension
Button Procedures Range
Systems with Analogue CO Lines, may give a caller the ability to extend the allowed talk time of an unsupervised CO to CO
connection. See Supervisor or System Engineer for CO-CO Extn Code.
To use the Co-Co Call timer extension,
A party using a CO to Co line connection (eg two external parties of a 3 way conference, is
unsupervised when the initiating station withdraws form the conference) receives warning tone 15 sec
before the unsupervised conference timer (U-S Confr Timer) expires and the connection is dropped.
After the tone either party may dial the CO-CO Call timer extension code.
Followed by a digit for the appropriate multiple of the U-S Confr Timer required.
The total allowable call time is extended to the multiple of U-S Confr Timer
E.g. Unsupervised Conference Timer of 10 min: User dials (CO-Co Call Timer Extn Code) 4 . Max
talk time allowed is now 40 min.
CO-Co Call Timer
Extn Code
(Timer extn multiple)
1~9