LG AHBW Series, Руководство по установке

Страница: 67 / 81

System Set-Up
Installation Manual 67
ENGLISH
Code Item Detail Remark
22 Function Setting cut-off temperature in cooling mode
(FCU setting included)
Description Determine leaving water temperature when the unit is turned off.
This function is used for preventing condensation
on the floor in cooling mode.
Value #1 Note Cut-off temperature. Value #1 is valid when Value #2 is
'01 (that means, FCU is installed)'."
Default 16 °C
Range 16 ~ 25 °C
Value #2 Note Determines if FCU is installed or not. '01' means 'FCU is
not installed', and '00' means 'FCU is installed.'
Default 00
Range 00(Equipped) ~ 01(not Equipped)
23 Function Setting outdoor temperature range for weather-dependent
operation
Description Setting outdoor Max/Min temperature for weather-dependent
operation
Value #1 Note Upper Limit of setting range
Default -10 °C
Range -20 ~ 05 °C
Value #2 Note Lower Limit of setting range
Default 15 °C
Range 10 ~ 20 °C
24 Function Setting indoor air temperature range for weather-dependent
operation
Description Setting indoor Max/Min temperature for weather-dependent
operation
Value #1 Note Upper limit of setting range
Default 21 °C
Range 20 ~ 30 °C
Value #2 Note Lower limit of setting range
Default 16 °C
Range 16 ~ 19 °C
21 Function Setting electric heater on / off temperature
DIP switch No.6 = Off No.6 = Off
setting No.7 = On No.7 = Off
Description Setting for using Step 1 capacity
of electric heater
Setting for using Step 2 capacity
of electric heater
Value #1 Note
Base outdoor air temperature
Default 0 °C
Range -15 ~ 18 °C
Value #2 Note Not used
Default - 0 °C
Range - 0 ~ 33 °C
DIP Switch
setting is
described in
Chapter 8 of
Installation
Manual.
Outdoor air temperature where
Step 1 capacity of electric heater
starts operation.
Temperature gap (it means 'how
much colder than base outdoor
air temperature?')