85
206-4292 Draft A.2
Reference: Using the TV’s Zoning Features (Cont.)
Using the Wi-Fi Zoning Feature with Cloning Con
fi
guration
A location-speci
fi
c Wi-Fi con
fi
guration / Clone (.tlx)
fi
le may be saved (exported) from a Master TV and
then be used to con
fi
gure Target TVs. First, the wireless network (i.e., the access point login data) must
be con
fi
gured in the Master TV’s IP Environment Menu (see “Con
fi
guring a Wi-Fi Network Connection” on
page 65). Then, a Wi-Fi Zone # must be set in the Master TV (see “Set the TV Zone # and/or Wi-Fi Zone #
in the TV” below). If desired, a TV Zone # may also be set in the Master TV.
For example, if the Wi-Fi Zone # is set to 4 and the TV Zone # is set to 5 before the Clone
fi
le export is
initiated, the Master TV’s Installer Menu pro
fi
le will be saved with the Zone 5 assignment, and within that
Installer Menu pro
fi
le, the access point login data for wireless networking (i.e., SSID, security type, and
security key) will be saved with a Wi-Fi Zone 4 assignment. In order to con
fi
gure the Target TVs with the
proper Installer Menu pro
fi
le and access point login data, you must set both the TV Zone # and the Wi-Fi
Zone # in the Target TVs accordingly before importing the Clone
fi
le. See “Set the TV Zone # and/or Wi-Fi
Zone # in the TV” below. Also, see “Cloning Procedures” on pages 50 to 56 for additional information on
the cloning processes. If the Wi-Fi Zone # in the TV is set to 0 (default), the TV will not obtain access point
login data from the Installer Menu pro
fi
le with which it is con
fi
gured unless the pro
fi
le contains the global
Wi-Fi Zone 100. Any TV that does not
fi
nd its matching Wi-Fi Zone # in the Clone
fi
le, but does
fi
nd the
global Wi-Fi Zone 100, will be con
fi
gured with the global access point login data.
Set the TV Zone # and/or Wi-Fi Zone # in the TV
You can set the TV Zone # and/or the Wi-Fi Zone # in the EZ-Manager Wizard (see “EZ-Manager Wizard”
on pages 12 to 21) or, if the TV is in Pass-through Mode, via the TV’s setup menus as described below.
Note that the following procedure can only be performed while the TV is in Pass-through Mode. You will also
be able to specify a Label (North, South, East, West) and Room Number for this TV, if desired.
1. Turn ON the TV.
2. Press
MENU
on the Installer Remote, and use the arrow navigation keys to select/highlight the
General
menu icon. Then, press
OK
.
3. In the General Menu, use the Up/Down arrow keys to select
Room Info
, and then press
OK
.
4. In the Room Info screen, complete the appropriate
fi
elds as described below. Use the Up/Down arrow
keys on the Installer Remote to navigate between each of the
fi
elds.
• Wi-Fi Zone: Enables you to set a Wi-Fi Zone # so that the TV can be con
fi
gured with a particular
access point’s login data for wireless networking. Login data (i.e., SSID, security type, and security
key) may be provided in a Clone/Con
fi
guration (.tlx)
fi
le.
To assign a Wi-Fi Zone, select/highlight the
Wi-Fi Zone
fi
eld and press
OK
. Then, use the Left/Right
arrow keys to specify the desired Wi-Fi Zone # (1–99). Press
OK
when you are
fi
nished.
• TV Zone: Enables you to set a TV Zone # so that the TV can be con
fi
gured with Installer Menu and/
or TV Setup Menu settings intended only for the assigned Zone. The Installer Menu and/or TV Setup
Menu settings may be provided in a Clone/Con
fi
guration (.tlx)
fi
le. If the TV is being con
fi
gured for FTG
Mode via CPU, the TV Zone # setting also allows the TV to omit channels that have been restricted
in the FTG Channel Map (see “FTG Channel Map Zone Restrictions” on page 83).
To change the TV Zone, select/highlight the
TV Zone
fi
eld and press
OK
. Then, use the Left/Right
arrow keys to specify the desired TV Zone # (0–8). Press
OK
when you are
fi
nished.
(Continued on next page)
