16
206-4292 Draft A.2
EZ-Manager Wizard (Cont.)
EZ-Manager Wizard (Cont.)
Note:
Zoning features are only applicable for TVs that will be con
fi
gured using a “.tlx”
fi
le (local or
remote con
fi
guration).
ZONES, LABEL, AND ROOM NUMBER
NEXT
USB CONFIGURATION
.
If creating Wi-Fi Zones for AP settings, select the appropriate Wi-Fi Zone
# (1-99) based on the Wi-Fi Zone in which this TV is installed.
.
If creating Zones for Installer Menu settings and/or Channel Mapping,
select the appropriate TV Zone # (0-8) based on the Zone in which this TV is
installed.
(See Commercial Mode Setup Guide for more information.)
.
Select a Label and/or use the alphanumeric keypad on the remote to input
the Room Number.
.
When done, select NEXT to continue.
ZONES & ROOM NUMBER
EXIT
Wi-Fi Zone
<
0
>
TV Zone
<
0
>
Label
<
-----
>
Room Number
Room Number
01
1. Complete the appropriate
fi
eld(s) as described below. Use the Up/Down arrow keys on the
Installer Remote to navigate between each of the
fi
elds.
• Wi-Fi Zone:
Enables you to set a Wi-Fi Zone # so that the TV can be con
fi
gured with a
particular access point’s login data for wireless networking. Login data (i.e., SSID, security type,
and security key) may be provided in a Clone/Con
fi
guration (.tlx)
fi
le.
To assign a Wi-Fi Zone, navigate to the Wi-Fi Zone
fi
eld at the top left of the screen, and use
the Left/Right arrow keys to specify the desired Wi-Fi Zone # (1–99).
• TV Zone: Enables you to set a TV Zone # so that the TV can be con
fi
gured with Installer Menu
and/or TV Setup Menu settings intended only for the assigned Zone. The Installer Menu and/or
TV Setup Menu settings may be provided in a Clone/Con
fi
guration (.tlx)
fi
le. If the TV is being
con
fi
gured for FTG Mode via CPU, the TV Zone # setting also allows the TV to omit channels
that have been restricted in the FTG Channel Map.
To change the TV Zone from its default value (0), navigate to the TV Zone
fi
eld, and use the
Left/Right arrow keys to specify the desired TV Zone # (1–8).
• Label: Allows you to select a North, South, East, or West text label for this TV. In the Label
fi
eld, use the Left/Right arrow keys to select the applicable label.
• Room Number: Allows you to specify the number of the room—up to 16 characters—in which
the TV is located. To enter a room number, navigate to the Room Number
fi
eld and press
OK
.
You can then use the number keys on the Installer Remote to direct enter a room number, or
you can use the arrow keys to select the appropriate alphanumeric character(s) from the pop-
up virtual keyboard at the bottom of the screen. When you are done, select
Enter
from the
virtual keyboard, and then press
OK
on the Installer Remote.
2. When you are ready to continue, select the appropriate option, as follows:
• To proceed to the next EZ-Manager screen, use the arrow keys to select
NEXT
, and then
press
OK
on the Installer Remote. Continue to “Con
fi
gure Pro:Centric Settings” on the following
page.
• To use a USB memory device to complete the con
fi
guration, continue to “USB Con
fi
guration”
on pages 21 to 22.
