LG-Ericsson IPECS WIT-400HE Скачать руководство пользователя страница 10

Страница: 10 / 121

Preparation

Before Starting

•

Avoid installing the product near fire or in a small space with poor-

ventilation. If not, fire or product defects could be caused.

•

Do not put the phone inside a washing machine or a microwave. It

could cause explosion, problems, deformation or defects.

•

Avoid installing the product on a shelf or a slanted surface. If not,

the product could fall, causing personal injuries or defects on the

phone.

•

Avoid installing the product close to other electronic products

such as TV, audio instruments, etc. It may cause some noises due to

electromagnetic interference. Properly install the base away from

such products.

•

Avoid installing or using the product near kitchen utensils such as

cooking table, humidifier, rice-cooker, etc., or in locations exposed

to rain and wind or such places as bathroom where water might be

splashed. Electric shock, fire, deformation or product defects could

be caused.

WARNING:

Power Supply

•

Remove dust from the power plug pin and insert the power plug

tightly into power receptacle. If not, fire or electric shock could be

caused.

•

Do not use a damaged or loosened plug, and do not modify or

damage the power cord. Fire or electric shock could be caused.

•

Do not connect a multiple number of cords into a single power

connector. Fire or electric shock could be caused.

•

Do not touch the power plug with wet hands and grasp the power

supply plug when unplugging the power cord. Fire or electric

shock could be caused.

•

Do not cover the power cord and the adaptor with a pad, and do

not place them near heating instruments. Do not let children or

pets bite the phone or the power cable. Fire or electric shock could

be caused.

•

Use the adaptor that was included in the product package (See

the product specification). Check the rated voltage at home. Using

other voltages may cause a fire.

•

Ensure that the external cords of the phone are disconnected

before it is moved from the installation site. If not, fire or electric

shock could be caused.

•

Do not bend the power cord reluctantly, and do not place a heavy

instrument on the power cord. Fire or electric shock could be

caused.

Содержание IPECS WIT-400HE


























































































































Результаты поиска

Содержание IPECS WIT-400HE

Отзывы:

Похожие инструкции для IPECS WIT-400HE

Бренды по названию

Популярные бренды

LG-Ericsson IPECS WIT-400HE, Руководство пользователя

Результаты поиска

Содержание IPECS WIT-400HE

Отзывы:

Похожие инструкции для IPECS WIT-400HE

Бренды по названию

Популярные бренды