82
Chapter 10
System
Flash
The Flash function allows you to dial while busy tone is heard or to
make another call without press
to end a current call.
1. If the called party is busy.
2. Press navigation key left to select
System > Flash
.
2. When dial tone is heared, enter the phone number to which you
want to call again.
System Speed
You may program frenquently dialed external number of your choice
and store them in Speed Dial location on your phone. Internal num-
ber cannot be stored in speed dial.
Storing a Speed Dial
1. Press
to access programing mode.
2. Press navigation key left to select
System > System Speed
and press
.
3. Enter the Speed Dial location with the number which can be up to 2
or 3 digits long, you want to store.
•
The screen will show "
ENTER SPD (XX)
" to prompt you to enter the
Speed Dial location number where required.
•
Assigned Speed Dial number for your phone may differ depend-
ing on what system you have used. In iPECS-LIK, the Speed Dial
number are:
- LIK 50/100: 00 ~ 19
- LIK 300: 000 ~ 099
3. Enter the CO Code. Normally the CO code is '9' or '0' etc. For more informa-
tion on this, please ask your system administrator.
•
For example, "
SPEED 01
" means that the number of location in the Speed
Dial you entered.
4. Eenter a phone number to the Speed Dial location 01 and press
to save
the location.
5. Enter a name to the number using the keypad and press
to save the
name.
•
You can enter alphanumeric characters using the phone's keypad sup-
ported the text input mode are ABC or 123 refering to "Character Input
Table" on page 85.
•
The name of an Speed Dial can contain up to 16 characters.
6. Repeat steps 2~5 for each Speed Dial you want to add.
