Saving energy and paper
Configuring power save mode settings
Sleep mode
1
From the control panel, navigate to:
Settings
>
Device
>
Power Management
>
Timeouts
>
Sleep Mode
For non
‑
touch
‑
screen printer models, press
to navigate through the settings.
2
Enter the amount of time that the printer stays idle before it enters Sleep mode.
Hibernate mode
1
From the control panel, navigate to:
Settings
>
Device
>
Power Management
>
Timeouts
>
Hibernate Timeout
For non
‑
touch
‑
screen printer models, press
to navigate through the settings.
2
Select the amount of time before the printer enters Hibernate mode.
Notes:
•
Make sure to wake the printer from Hibernate mode before sending a print job.
•
To wake the printer from Hibernate mode, press the power button.
•
The Embedded Web Server is disabled when the printer is in Hibernate mode.
Adjusting the brightness of the display
Note:
This setting is available only in some printer models.
1
From the control panel, navigate to:
Settings
>
Device
>
Preferences
For non-touch-screen printer models, press
to navigate through the settings.
2
In the Screen Brightness menu, adjust the setting.
Conserving supplies
•
Print on both sides of the paper.
Note:
Two-sided printing is the default setting in the print driver.
•
Print multiple pages on a single sheet of paper.
•
Use the preview feature to see how the document looks like before printing it.
•
Print one copy of the document to check its content and format for accuracy.
Maintaining the printer
126
Содержание MX-B557P
