manualshive.com logo in svg

Lexmark MB2236, Руководство по обслуживанию

Продукт Lexmark MB2236 - это надежное и многофункциональное монохромное устройство для печати, копирования и сканирования. Для бесплатного скачивания руководства пользователя по данной модели, посетите manualshive.com. Научитесь использовать все функции устройства с помощью подробного руководства.

Поделиться
Скачать
background image

VORSICHT – STROMSCHLAGGEFAHR: 

Weist auf das Risiko eines elektrischen Schlags hin.

VORSICHT – HEISSE OBERFLÄCHE: 

Weist auf das Risiko von Verbrennungen bei Berührung hin.

VORSICHT – KIPPGEFAHR: 

Weist auf Quetschgefahr hin.

VORSICHT – QUETSCHGEFAHR: 

Weist auf das Risiko hin, zwischen beweglichen Komponenten

eingequetscht zu werden.

ACHTUNG—ROTIERENDE LÜFTERFLÜGEL: 

Weist auf das Verletzungsrisiko durch drehende

Ventilatorflügel hin.

ACHTUNG—BEWEGLICHE TEILE 

Weist auf das Risiko von Verletzungen und Abschürfungen durch sich

drehende Teile hin.

Safety information

•

The safety of this product is based on testing and approvals of the original design and specific components.
The manufacturer is not responsible for safety in the event of use of unauthorized replacement parts.

•

The maintenance information for this product has been prepared for use by a professional service person
and is not intended to be used by others.

•

There may be an increased risk of electrical shock and personal injury during disassembly and servicing of
this product. Professional service personnel should understand this risk and take necessary precautions.

CAUTION—SHOCK HAZARD: 

When you see this symbol on the product, there is a danger from

hazardous voltage in the area of the product where you are working. Unplug the product before you
begin, or use caution if the product must receive power in order to perform the task.

CAUTION—POTENTIAL INJURY: 

The lithium battery in this product is not intended to be replaced.

There is a danger of explosion if a lithium battery is incorrectly replaced. Do not recharge,
disassemble, or incinerate a lithium battery. Discard used lithium batteries according to the
manufacturer's instructions and local regulations.

CAUTION—POTENTIAL INJURY: 

To avoid the risk of fire or electrical shock, connect the power cord

to an appropriately rated and properly grounded electrical outlet that is near the product and easily
accessible.

CAUTION—POTENTIAL INJURY: 

To avoid the risk of fire or electrical shock, use only the power cord

provided with this product or the manufacturer's authorized replacement.

CAUTION—POTENTIAL INJURY: 

Do not use this product with extension cords, multioutlet power

strips, multioutlet extenders, or UPS devices. The power capacity of these types of accessories can
be easily overloaded by a laser printer and may result in a risk of fire, property damage, or poor
printer performance.

CAUTION—POTENTIAL INJURY: 

Only a Lexmark Inline Surge Protector that is properly connected

between the printer and the power cord provided with the printer may be used with this product. The
use of non-Lexmark surge protection devices may result in a risk of fire, property damage, or poor
printer performance.

CAUTION—POTENTIAL INJURY: 

If the printer weight is greater than 18 kg (40 lb), then it requires

two or more trained personnel to lift it safely.

3400-48x

Notices, conventions, and safety information

12

Содержание MB2236






























































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для MB2236

Canon i 320 Simplified Manual preview
i 320
Бренд: Canon Страницы: 18
Canon G1020 Series Getting Started preview
G1020 Series
Бренд: Canon Страницы: 16
Canon CX-G2400 Getting Started Manual preview
CX-G2400
Бренд: Canon Страницы: 39
Canon i455 Series Setup Instructions preview
i455 Series
Бренд: Canon Страницы: 2
Canon i455 Series Quick Start Manual preview
i455 Series
Бренд: Canon Страницы: 73
Canon i70 Series Quick Start Manual preview
i70 Series
Бренд: Canon Страницы: 29
Canon i550 Parts Catalog preview
i550
Бренд: Canon Страницы: 16
Canon i475D Series Printing Manual preview
i475D Series
Бренд: Canon Страницы: 44
Canon G3410 Getting Started preview
G3410
Бренд: Canon Страницы: 60
Olympus P 400 Easy Printing Manual preview
P 400
Бренд: Olympus Страницы: 236
Canon I450 - i 450 Color Inkjet Printer Simplified Manual preview
I450 - i 450 Color Inkjet Printer
Бренд: Canon Страницы: 13
Oki 10i Read Me First preview
10i
Бренд: Oki Страницы: 16
Samsung CJX-1050W Quick Install Manual preview
CJX-1050W
Бренд: Samsung Страницы: 2
TallyGenicom 6300 Series Maintenance Manual preview
6300 Series
Бренд: TallyGenicom Страницы: 175
Xerox 665 User Manual preview
665
Бренд: Xerox Страницы: 89
Oce TCS500 User Manual preview
TCS500
Бренд: Oce Страницы: 306
Printek VehiclePro 420 Operator'S Manual preview
VehiclePro 420
Бренд: Printek Страницы: 31
Ricoh Aficio SP C240SF Firmware Update Manual preview
Aficio SP C240SF
Бренд: Ricoh Страницы: 14

Бренды по названию

Популярные бренды

Загрузить еще бренды