Lexmark M3150, Руководство по обслуживанию

Страница: 182 / 400

To run the Feed test:
1
From the Diagnostics menu, navigate to:
Input Tray Tests > Feed Tests
2
Choose the input source. All installed sources appear.
3
Choose any of the following:
•
Single —Feeds a single page.
•
Continuous —Continuously feeds pages until X is pressed.
Sensor Test
Use this test to determine if the input tray sensors are working correctly.
1
From the Diagnostics menu, navigate to:
Input Tray Tests > Sensor Test
2
Select the input source. All installed sources appear.
Not all sensors appear for all trays. The following table indicates which tray sensors are available for each
input source:
Input source Tray empty sensor Pass through sensor
Standard tray
Optional 250
‑
/550-sheet tray
Multipurpose feeder
3
Manually actuate each sensor. The tray empty sensor can be actuated by hand; however, a sheet of paper
can be used to cover the pass through sensor.
4
Press X to exit the test.
Output Bin Tests
Feed Tests
This test verifies that media can be fed to a specific output bin. No information is printed on the media.
To run this test:
1
From the Diagnostics menu, navigate to:
Output Bin Tests > Feed Tests
2
Select the output bin into which you want the paper to exit. All installed output bins appear.
3
Select one of the following:
•
Single—Feeds a single page.
•
Continuous—Continuously feeds pages until X is pressed.
4514-6xx
Service menus
182