Lexmark 6500E Скачать руководство пользователя страница 270

Страница: 270 / 337

If the error occurs again, then:

Turn the printer off.

Unplug the power cord from the wall outlet.

Remove the envelope feeder.

Contact customer support.

•

From the scanner control panel, touch

Continue

to clear the message and print without using the envelope feeder.

Remove packaging material, [area name]

Remove any remaining packaging material from the specified location.

Remove paper from standard output bin

Remove the stack of paper from the standard exit bin.

Remove paper from bin [x]

Remove the paper from the specified bin. The printer automatically senses paper removal and resumes printing.

If removing the paper does not clear the message, then touch

Continue

Remove paper from all bins

Output bins have reached their capacity. Remove paper from all output bins to clear the message and continue printing.

Remove paper from [linked bin set name]

Remove the paper from the specified bin. The printer automatically senses paper removal and resumes printing.

If removing the paper does not clear the message, then touch

Continue

Replace all originals if restarting job.

Try one or more of the following:

•

Touch

Cancel job

to clear the message and cancel the scan job.

•

Touch

Scan from automatic feeder

to continue scanning from the ADF immediately after the last successful scan

job.

•

Touch

Scan from flatbed

to continue scanning from the scanner immediately after the last successful scan job.

•

Touch

Finish job without further scanning

to end the last successful scan job.

•

Touch

Restart job

to restart the scan job with the same settings from the previous scan job.

Troubleshooting

270

Содержание 6500E


















































































































































































































































































































































Результаты поиска

Содержание 6500E

Отзывы:

Бренды по названию

Популярные бренды

Lexmark 6500E, Руководство пользователя

Результаты поиска

Содержание 6500E

Отзывы:

Бренды по названию

Популярные бренды