Lexicon RV-8, Руководство по обслуживанию

Страница: 65 / 248

Lexicon
FUNCTIONAL DIAGNOSTICS DESCRIPTIONS
Diagnostic Tests
This section describes the RV-8 power-on and diagnostics process
.
Setup:
1. Connect the RV-8 to a 120VAC (220VAC for European model) power source.
2. Set the rear panel power switch of the RV-8 to the “1” (ON) position.
Test:
1. Verify the three LEDS at the right side of the VFD display light: RED, AMBER and BLUE.
2. In approximately three seconds, verify the display indicates: “ ** LEXICON ** ”
3. When the “ ** LEXICON ** ” display appears, within eight seconds press and hold the Zone 2 DVD2
and Zone 3 DVD2 buttons.
4. The display indicates a display similar to the following. Note that the BOOTROM revision date
“XX/XX” and time “XX:XX” will contain valid digits:
“LEXICON RV-8 BOOTROM
©200X XX/XX XX:XX”
5.
Continue to hold the buttons for another seven seconds until the display indicates:
“DIAGS MENU
FUNCTIONAL TESTS”
5-11