38
9.
Using two hands, squeeze the Power Module
mechanism’s release bar and lower it halfway to
check alignment with the ports and guide posts.
10.
Lower the Power Module mechanism until you hear a
click as the mechanism locks into place. Ensure the
mechanism is fully engaged with all Power Module
connectors. The ridges on the Power Module’s top
edge should not be visible. If the mechanism does
not engage, raise it again and push the Power
Modules to the back of the station to realign, then try
again.
11.
Identify the places on the front and back of the frame that show silver grounding locations
instead of the normal black of the frame.
Important:
Do not apply excessive force.
CAUTION:
The metal EMI shield edges can be sharp. Take care when moving and installing
the shields.
250_IGcombo.pdf 44
11/18/2019 3:37:41 PM