36
Note:
If only one Power Module is being
installed, it must be installed in the rear
holder (b).
3.
Repeat the step for the second Power
Module if applicable.
4.
Lift each Power Module to the upright
position one at a time.
5.
If not already done, remove the safety caps
from the coolant ports.
6.
With hand pressure, swing the bottom of
the touchscreen out to a 45 degree angle.
CAUTION:
The bottom edge and corners
of the touchscreen are sharp. Take care
when moving underneath the raised
screen.
250_IGcombo.pdf 42
11/18/2019 3:37:41 PM