6
Express 250 Charging Station Crate
1.
Express 250 main body
a.
Swing arms
b.
Touchscreen
c.
Charging connectors (in
bin for shipment)
d.
Forklift handles and crane
lift guides (removed during
installation)
2.
Rear cover panels (x3)
3.
Area light bar
4.
LED display
5.
Front cover panels (x3)
6.
Left extrusion
7.
Right extrusion
8.
Installation kit:
•
16 mm (5/8 in) -11 nuts (x12)
•
16 mm (5/8 in) washers (x12)
•
M5x8 T25 Torx screws (x10)
•
M5 washers (x10)
•
Plastic caps (x2, 2 extra)
•
M5 x 10 T25 Torx shoulder
screws with retained washers
(x2, 2 extra)
•
Duct seal compound
•
EMI shields (x2) (not shown)
•
Propylene glycol coolant (the coolant label references its Safety Data Sheet if needed)
•
Ethernet connector that accommodates up to 6 mm (0.24 in) OD jacketed Cat5e or Cat6 cable
(for Paired installations only)
•
Dielectric grease (for Paired installations only)
•
Labels for panel breakers (for Paired installations only)
•
Rodent guard bracket grommets for DC (x1 73 mm (2 7/8 in) OD, x1 22 mm (7/8 in) OD) (for
Paired installations only)
Important:
Leave components in the shipping crate until needed. When removing, protect
them from damage (such as scratches) by placing them flat on a blanket or tarp, face up.
Do not stand up cover panels, as they may be knocked or blown over. Cover charging
connectors to prevent damage or ingress.
7
3
2
4
5
1
6
8
250_IGcombo.pdf 12
11/18/2019 3:37:40 PM